Natural Fibre-Reinforced Polymethyl Methacrylate for Denture Bases: A Critical Review of Interfacial Engineering, Mechanical Performance, Physical Stability, and the Translational Potential of Kenaf

Authors

  • Nur Eida Sazali Centre of Restorative Dentistry Studies, Faculty of Dentistry , MARA University of Technology image/svg+xml , Oral Health Division, Ministry of Health, Putrajaya, Malaysia
  • Aiemeeza Rajali Centre of Restorative Dentistry Studies, Faculty of Dentistry , MARA University of Technology image/svg+xml
  • Nor Wati @ Nur Atikah Mustafa Centre of Restorative Dentistry Studies, Faculty of Dentistry , MARA University of Technology image/svg+xml
  • Siti Norasmah Surip Faculty of Applied Sciences , MARA University of Technology image/svg+xml
  • Suzana Ratim Faculty of Applied Sciences , MARA University of Technology image/svg+xml
  • Yuli Nugraeni Faculty of Dentistry , University of Brawijaya image/svg+xml
  • Fatima Faculty of Dentistry , University of Brawijaya image/svg+xml
  • Rohana Ahmad Centre of Restorative Dentistry Studies, Faculty of Dentistry , MARA University of Technology image/svg+xml

DOI:

https://doi.org/10.24191/cos.v13i2.13832

Keywords:

denture base, kenaf, silane coupling agent, natural fibre, polymethyl methacrylate, fibre-matrix adhesion

Abstract

Objectives: To critically evaluate the evidence supporting kenaf (Hibiscus cannabinus) and related plant-derived fibres as reinforcement for polymethyl methacrylate (PMMA) denture-base materials, with particular emphasis on fibre-matrix adhesion, surface modification, mechanical performance, water-related behavior, surface quality, and clinical translation.

Materials and Methods: A focused critical narrative review was undertaken using PubMed/MEDLINE and targeted searches of peer-reviewed publisher and indexing records. The proposal literature was used as a seed set, and searches were updated to 26 August 2026. Priority was given to studies involving plant-fibre-reinforced dental PMMA and to mechanistic studies of kenaf surface treatment relevant to PMMA. Evidence was synthesised thematically rather than quantitatively.

Results: Direct evidence for kenaf-reinforced denture PMMA remains sparse. A 2021 study reported an increase in flexural strength from 68.9 to 82.5 MPa after incorporating 2 wt% kenaf, but did not optimize the fibre surface treatment or evaluate a broad range of physical properties. More recent evidence from hemp, cellulose microfibres, and cellulose nanofibres indicates that plant-derived reinforcement can improve selected mechanical properties, but the responses are concentration, processing, and matrix dependent. Silane modification can improve cellulose-PMMA compatibility and dispersion; however, kenaf silanisation data are derived largely from non-dental polymer matrices. Higher fiber loading may increase agglomeration, void formation, water sorption, or surface roughness.

Conclusions: Kenaf is a promising experimental reinforcement for PMMA, but current evidence is insufficient for clinical endorsement. The limiting factor is the interface, therefore future work should optimise silane chemistry and fibre loading using coupled chemical, morphological, mechanical and physical analyses followed by hydrothermal and fatigue ageing.

References

Alqutaibi, A. Y., Baik, A., Almuzaini, S. A., Farghal, A. E., Alnazzawi, A. A., Borzangy, S., Aboalrejal, A. N., AbdElaziz, M. H., Mahmoud, I. I., & Zafar, M. S. (2023). Polymeric denture base materials: A review. Polymers, 15(15), 3258. https://doi.org/10.3390/polym15153258.

Baysan, F. D., Kuşçu, S., Korkmaz, N., & Çelebi, N. (2025). Evaluation of the effects of hemp fiber addition on fracture strength, acrylic tooth bonding and water absorption of polymethyl methacrylate. Selcuk Dental Journal, 12(1), 14–19. https://doi.org/10.15311/selcukdentj.1483484.

Bolayır, G., Soygun, K., Kılıç Avşar, M., Boztuğ, A., Kaya, S., & Katin, K. P. (2022). Effect of hemp fiber addition on mechanical properties of acrylic resin: Coupled experimental and theoretical study. Fibers and Polymers, 23(8), 2271–2278. https://doi.org/10.1007/s12221-022-4121-4.

Gad, M. M., Fouda, S. M., Al-Harbi, F. A., Näpänkangas, R., & Raustia, A. (2017). PMMA denture base material enhancement: A review of fiber, filler, and nanofiller addition. International Journal of Nanomedicine, 12, 3801–3812. https://doi.org/10.2147/IJN.S130722.

Hammad Uddin, M. K., Mehar, N., Ammar Khan, M., Khoso, M. H., Saba, B., Lone, M. A., Akram, A., Mateen, S. M., Fareed, M. A., & Zafar, M. S. (2026). Impact of plant fiber reinforcement on mechanical properties of PMMA denture base resin: A systematic review. Biomaterial Investigations in Dentistry, 13(1), 188–197. https://doi.org/10.2340/biid.v13.45632.

International Organization for Standardization. (2013). Dentistry—Base polymers—Part 1: Denture base polymers (ISO Standard No. 20795-1:2013). https://www.iso.org/standard/62277.html.

Jamadi, A. H., Razali, N., Petrů, M., Taha, M. M., Muhammad, N., & Ilyas, R. A. (2021). Effect of chemically treated kenaf fibre on mechanical and thermal properties of PLA composites prepared through fused deposition modeling (FDM). Polymers, 13(19), 3299. https://doi.org/10.3390/polym13193299.

Johari, Y., Subramaniam, P. V., Md Yusof, M. N., Azlisham, N. A. F., Khamis, M. F., & Ariffin, Z. (2021). Evaluation of flexural strength and radiopacity of polymethyl methacrylate incorporated with kenaf fiber. Annals of the Romanian Society for Cell Biology, 25(6), 19584–19590. http://annalsofrscb.ro/index.php/journal/article/view/9797.

John, J., Mani, S. A., Palaniswamy, K., Ramanathan, A., & Razak, A. A. A. (2015). Flexural properties of poly(methyl methacrylate) resin reinforced with oil palm empty fruit bunch fibers: A preliminary finding. Journal of Prosthodontics, 24(3), 233–238. https://doi.org/10.1111/jopr.12191.

Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004). Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites Part A: Applied Science and Manufacturing, 35(3), 371–376. https://doi.org/10.1016/j.compositesa.2003.09.016.

Kawaguchi, T., Lassila, L. V. J., Baba, H., Tashiro, S., Hamanaka, I., Takahashi, Y., & Vallittu, P. K. (2020). Effect of cellulose nanofiber content on flexural properties of a model, thermoplastic, injection-molded, polymethyl methacrylate denture base material. Journal of the Mechanical Behavior of Biomedical Materials, 102, 103513. https://doi.org/10.1016/j.jmbbm.2019.103513.

Kuşçu, S., Baysan, F. D., & Korkmaz, N. (2025). Effect of addition of hemp fiber and lignin-pectin-free hemp fiber to poly(methyl methacrylate) on surface roughness property. BMC Oral Health, 25, 874. https://doi.org/10.1186/s12903-025-06321-7.

Manoharan, P. S., John, J., K, P., Prasad, K., Fahad Ismail, T. M., Sivakumar, S., Sivakumar, K., Flora, J., Kumar Sivabalan, P., & Wase, P. (2024). Biofilm formation on denture base material reinforced with a novel organic material. Cureus, 16(7), e65232. https://doi.org/10.7759/cureus.65232.

Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023). Challenges and advancement in water absorption of natural fiber-reinforced polymer composites. Polymer Testing, 124, 108083. https://doi.org/10.1016/j.polymertesting.2023.108083.

Nurazzi, N. M., Shazleen, S. S., Aisyah, H. A., Asyraf, M. R. M., Sabaruddin, F. A., Mohidem, N. A., Norrrahim, M. N. F., Kamarudin, S. H., Ilyas, R. A., Ishak, M. R., Abdullah, N., & Nor, N. M. (2021). Effect of silane treatments on mechanical performance of kenaf fibre reinforced polymer composites: A review. Functional Composites and Structures, 3(4), 045003. https://doi.org/10.1088/2631-6331/ac351b.

Okeke, K. N., Vahed, A., & Singh, S. (2018). Improving the strength properties of denture base acrylic resins using Hibiscus sabdariffa natural fiber. Journal of International Dental and Medical Research, 11(1), 248–254.

Padmapiriyaa, S. G., Kumar M., N., & Manjunathappa, T. H. (2026). Mechanical and antimicrobial properties of nanocellulose-reinforced heat-cured versus the conventional heat-cured acrylic resins: An in vitro study. International Journal of Dentistry, 2026(1), 4009010. https://doi.org/10.1155/ijod/4009010.

Ren, X., Hada, T., Qi, K., Inokoshi, M., Uo, M., & Kanazawa, M. (2026). Effects of cellulose nanofiber reinforcement on the properties of three-dimensional-printed denture base resin: An in vitro study. Materials, 19(13), 2891. https://doi.org/10.3390/ma19132891.

Salih, S. I., Oleiwi, J. K., & Fadhil, H. S. (2017). Preparation and investigation of some properties of acrylic resin reinforced with Siwak fiber used for denture base applications. Kurdistan Journal of Applied Research, 2(3), 309–314. https://doi.org/10.24017/science.2017.3.53.

Sosiati, H., Al-Giffary, F., Adil, F. A., Kamiel, B. P., Adi, R. K., & Yusuf, Y. (2022). The properties of kenaf/carbon/PMMA hybrid composites by adding chitosan nano and microparticles. Materials Today: Proceedings, 66, 2908–2913. https://doi.org/10.1016/j.matpr.2022.06.556.

Taczała, J., Sawicki, J., & Pietrasik, J. (2020). Chemical modification of cellulose microfibres to reinforce poly(methyl methacrylate) used for dental application. Materials, 13(17), 3807. https://doi.org/10.3390/ma13173807.

Taczała-Warga, J., Sawicki, J., Krasowski, M., & Sokołowski, J. (2022). The effect of acrylic surface preparation on bonding denture teeth to cellulose fiber-reinforced denture base acrylic. Journal of Functional Biomaterials, 13(4), 183. https://doi.org/10.3390/jfb13040183.

Xu, J., Li, Y., Yu, T., & Cong, L. (2013). Reinforcement of denture base resin with short vegetable fiber. Dental Materials, 29(12), 1273–1279. https://doi.org/10.1016/j.dental.2013.09.013.

Yamazaki, Y., Ito, T., Ogawa, T., Hong, G., Yamada, Y., Hamada, T., & Sasaki, K. (2021). Potential of pure cellulose nanofibers as a denture base material. Journal of Oral Science, 63(1), 111–113. https://doi.org/10.2334/josnusd.20-0245.

Yerliyurt, K., Taşdelen, T. B., Eğri, Ö., & Eğri, S. (2023). Flexural properties of heat-polymerized PMMA denture base resins reinforced with fibers with different characteristics. Polymers, 15(15), 3211. https://doi.org/10.3390/polym15153211.

Zafar, M. S. (2020). Prosthodontic applications of polymethyl methacrylate (PMMA): An update. Polymers, 12(10), 2299. https://doi.org/10.3390/polym12102299.

Downloads

Published

2026-09-30

How to Cite

Sazali, N. E., Rajali, A., Mustafa, N. W. @ N. A., Surip, S. N., Ratim, S., Nugraeni, Y., Fatima, & Ahmad, R. (2026). Natural Fibre-Reinforced Polymethyl Methacrylate for Denture Bases: A Critical Review of Interfacial Engineering, Mechanical Performance, Physical Stability, and the Translational Potential of Kenaf. Compendium of Oral Science, 13(2), 1-15. https://doi.org/10.24191/cos.v13i2.13832