Leveraging Technology to Improve Safety on Construction Sites
Keywords:
construction industry, hazards, safety technologiesAbstract
The construction industry is consistently challenged by safety risks stemming from its dynamic and hazardous working environment. Common dangers such as falls, equipment-related injuries, electrical accidents, and on-site collisions necessitate the continuous improvement of safety management practices. This study explores the adoption of advanced safety technologies to mitigate these risks and enhance on-site safety performance. Utilizing a quantitative research approach, structured surveys were distributed to 274 contractors (Grades G4 to G7) operating in Perak, Malaysia—an area with a notably high incidence of construction-related accidents and fatalities. The study focuses on the implementation of technologies such as wearable devices, drones, IoT-based monitoring systems, Building Information Modelling (BIM), and augmented reality (AR). Findings indicate a positive impact of these technologies on improving safety outcomes, including real-time hazard identification and enhanced compliance with safety regulations. However, several barriers to adoption were identified, including high costs, insufficient technical knowledge, organizational resistance, and infrastructure limitations. Statistical analysis conducted using SPSS demonstrated strong correlations between the use of specific technologies and a decrease in reported safety incidents. The study recommends increasing access to technical training, promoting affordable innovations, and developing supportive regulatory frameworks to accelerate the integration of safety technologies in the construction sector. The research underscores the critical role of technology in fostering a safer, smarter, and more resilient construction industry.
References
Allam, Z., & Dhunny, Z. A. (2019). On big data, artificial intelligence and smart cities. Cities, 89, 80–91.
Arditi, D., Tokdemir, O. B., & Suh, K. (2019). Predicting the safety outcomes of construction projects: An application of artificial neural networks. Journal of Construction Engineering and Management, 145(1), 04018124.
Azhar, S., Hein, M., & Sketo, B. (2011). Building Information Modeling (BIM): Benefits, risks and challenges. International Journal of Construction Education and Research, 8(1), 3–18.
Bakhoum, E. S., Younis, A. A., Aboulata, H. K., & Bekhit, A. R. (2023). Impact assessment of implementing virtual reality in the Egyptian construction industry. Ain Shams Engineering Journal, 14(6), 102184.Guldenmund, F. W. (2000). The nature of safety culture: A review of theory and research. Safety Science, 34(1–3), 215–257.
Barbosa, F., Woetzel, J., Mischke, J., et al. (2017). Reinventing construction: A route to higher productivity. McKinsey Global Institute Report.
Cheng, T., & Teizer, J. (2013). Real‑time resource location data collection and visualization technology for construction safety and activity monitoring applications. Automation in Construction, 34, 3–15.
Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM Handbook: A Guide to Building Information Modeling (2nd ed.). John Wiley & Sons.
Edirisinghe, R., & Woo, J. (2021). BIM-based performance monitoring for smart building management. Facilities, 39(1/2), 19–35.
Fang, D., Wu, H., & Louisa, J. (2019). Integration of safety risk assessment and cost-benefit analysis in safety investment decision-making: A case study in construction. Safety Science, 113, 297–308.
Farooq, M. U., Waseem, M., Mazhar, S., Khairi, A., & Kamal, T. (2015). A review on internet of things (IoT). International Journal of Computer Applications, 113(1), 1–7.
Gunning, D., & Aha, D. (2019). DARPA’s Explainable Artificial Intelligence Program. AI Magazine, 40(2), 44–58..
Hale, A., Borys, D., & Else, D. (2003). Management of safety rules and procedures: A review of the literature. Journal of Safety Research, 34(3), 255–271.
Hassan, O. M., Krishnan, S., & Wendel, J. (2019). Predictive analytics for safety management: A case study of manufacturing plant. Journal of Safety Research, 70, 121–130.
Holzinger, A., Biemann, C., Pattichis, C. S., & Kell, D. B. (2017). What do we need to build explainable AI systems for the medical domain? arXiv preprint arXiv:1712.09923.
Hopkins, A. (2009). Thinking about process safety indicators. Safety Science, 47(4), 460–465.
Hussien, A. (2017). ARGILE: A Conceptual Framework for Combining Augmented Reality with Agile Philosophy for the UK Construction Industry. Liverpool John Moores University, United Kingdom.
Kang, Y. (2020). Enhancing construction safety training programs through virtual reality: The impact of haptic feedback. Safety Science, 129, 104858.
Li, X., Yi, W., Chi, H.‑L., & Wang, X. (2018). A review of Building Information Modeling (BIM) and Internet of Things (IoT) based asset management. Advances in Engineering Software, 120, 1–19.
Lu, Y., Morris, K. C., & Frechette, S. (2017). Current standards landscape for smart manufacturing systems. NISTIR 8107. National Institute of Standards and Technology.
Mohamed, O., Fath, H., El-Mohandes, M., & Ghoneim, E. (2023). Empirical study on the significant parameters affecting the productivity of steel reinforcement bar bending process in construction projects. Engineering, Construction and Architectural Management, 30(2), 503–520.
Musarat, M. A., Binti Mohd Nawi, M., Baxendale, T., & Abdullah, A. M. (2021). The role of information and communication technology (ICT) in green construction projects: a scoping review. IOP Conference Series: Earth and Environmental Science, 786(1), 012057.
OSHA. (2016). Recommended Practices for Safety and Health Programs. U.S. Department of Labor, Occupational Safety and Health Administration.
Park, J.W., Kim, K., and Cho, Y.K. (2017). A Framework of Automated Construction Safety Monitoring using Cloud- enabled BIM and BLE Mobile Tracking Sensors. Construction Engineering and Management, 143(2).
PricewaterhouseCoopers (PWC). (2018). Workforce of the future: The competing forces shaping 2030
Reason, J. (2000). Human error: Models and management. BMJ, 320(7237), 768–770.
Sacks, R., Perlman, A., & Barak, R. (2013). Construction safety training using immersive virtual reality. Construction Management and Economics, 31(9), 1005–1017.
Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in Construction, 18(3), 357–375.
Tavakolizadeh, S., Rameezdeen, R., & Keirnan, L. (2022). Application of a BIM-based automated clash detection and resolution approach to construction projects. Journal of Building Engineering, 46, 103274.
Teizer, J., Cheng, T., Fang, Y. (2017). Real-time proactive construction safety monitoring using BIM and sensor data. Automation in Construction, 84, 58–68.
Tezel, A., Lowe, D. J., & Park, C.-S. (2018). The role of text mining in construction safety. Safety Science, 103, 278–291.
Vinodkumar, M. N., & Bhasi, M. (2011). Safety management practices and safety behaviour: Assessing the mediating role of safety knowledge and motivation. Accident Analysis & Prevention, 43(4), 1200–1208.
Wang, X., Truijens, M., Hou, L., Wang, K., Ahmed, S. M., & Deb, S. (2018). Integrating augmented reality with BIM for visual data interactively in construction safety planning. Journal of Construction Engineering and Management, 144(6), 04018047.
Zhang, J., & Kumaraswamy, M. M. (2020). Developing a decision support system for managing sustainable construction projects. Journal of Cleaner Production, 242, 118482.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 NORSYAZWANA JENUWA, Norhafizah Yusop , Suhaila Ali, Wan Norizan Wan Ismail, Siti Sarah Mat Isa
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
