HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (HIRARC) ON LABORATORY WASTE DISPOSAL IN CHEMISTRY LABORATORY
Keywords:
academic laboratory, laboratory waste disposal, hazard, risk assessment, HIRARCAbstract
The academic laboratory used for teaching and learning often generates many types of hazardous wastes.
It is crucial to have proper laboratory waste disposal management to enhance safety and minimize the
environmental effect in the academic laboratory. The objective of this study was to determine the risk
associated with waste disposal activity in the chemistry laboratory of Universiti Teknologi MARA
Cawangan Pulau Pinang based on the Hazard Identification, Risk Assessment and Risk Control
(HIRARC) model. Five chemistry laboratories have been selected for this study. The first step involved
hazard identification conducted through workplace inspections and observation. Each hazard was
assessed, and the risk was calculated based on the likelihood of occurrence and severity of harm. Several
risk control options to reduce or eliminate the risk were proposed. The HIRARC model identified thirty
critical hazards in the waste disposal process, with 63.3% classified as low risk and the remaining 33.3%
and 3.3% as medium risk and high risk, respectively. Therefore, the waste disposal process can be
deemed hazardous to laboratory personnel. The main hazards were chemical (63%), physical (17%),
ergonomic (13%), and biological (7%). The high-risk activities were associated with the chemical
hazard. Engineering control, administrative control, and personal protective equipment (PPE) are
among the control measures presented in this study. The control measures and corrective actions could
be applied to improve the safety aspect in the laboratory and prevent accidents.
References
Abdul Wahab, Nor Aimi, Marina Mokhtar, Ainnie Rahayu Abdullah, Wan Zarina Wan Kamaruddin, Boon Tik
Lim, Azrinawati Mohd Zin, Siti Nur Amirah Diana Fadzilah, and Puteri Noranis Yusof. 2020. “Hazard
Identification , Risk Assessment and Risk Control at a Printing Company in Pulau Pinang.” Pp. 063–168 in 2nd
Kolokium Sains Teknologi dan Inovasi 2020, KOSTI 2020. Jabatan Sains Gunaan, Universiti Teknologi MARA
UiTM Cawangan Pulau Pinang.
Abdul Wahab, Nor Aimi, Nur Athyratul Aqila, Norain Isa, Nurul Izza Husin, Azrinawati Mohd Zin, Marina
Mokhtar, and Nur Maizatul Azra Mukhtar. 2021. “A Systematic Review on Hazard Identification, Risk
Assessment and Risk Control in Academic Laboratory.” Journal of Advanced Research in Applied Sciences and
Engineering Technology 24(1):47–62.
Ahmad, Asmalia Che, Ida Nianti, Mohd Zin, Muhammad Kamil Othman, and Nurul Huda Muhamad. 2016.
“Hazard Identification, Risk Assessment and Risk Control (HIRARC) Accidents at Power Plant.” in MATEC Web
of Conferences.
Barahim, Fraziel. 2010. “Hazard Identification , Risk Assessment and Risk Control ( Hirarc ) in a Corrugated Box
Manufacturer Hazard Identification , Risk Assessment and Risk Control ( Hirarc ) in a Corrugated Box
Manufacturer.” (Sgh 050013):96.
Chowdhury, Harun, Firoz Alam, and Israt Mustary. 2019. “Development of an Innovatiove Technique for Teaching
and Learning of Laboratory Experiments for Engineering Courses.” Energy Procedia 160(2018):806–11.
DOSH. 2008. Department of Occupational Safety and Health, Ministry of Human Resources, Malaysia on
Guidelines for Hazard Identification, Risk Assessment and Risk Control (HIRARC).
Karima, Risuke. 2013. “The Accidents and the Incidents Associated with the Disposal of Chemicals at the
University of Tokyo.” Journal of Environment and Safety 4(2):2_127-2_143.
Ramdan, Fauzi, Kata Kunci, Identifikasi Bahaya, Keselamatan Kerja, and dan Hirarc. 2017. “Identifikasi Bahaya
Dan Penilaian Risiko Pada Divisi Boiler Menggunakan Metode Hazard Identification Risk Assessment and Risk
Control (Hirarc).” Journal of Industrial Hygiene and Occupational Health 1(2).
Saedi, A. M., J. J. Thambirajah, and Agamuthu Pariatamby. 2014. “A HIRARC Model for Safety and Risk
Evaluation at a Hydroelectric Power Generation Plant.” Safety Science 70:308–15.
Sarah Ismail, Zitty, Kadir Arifin, and Kadaruddin Aiyub. 2015. “Promoting OSHA at Higher Institutions:
Assessment of Level of Safety Awareness among Laboratory Users.” Taylor Business Review 2(2):155–64.
Yang, P., L. J. Zhang, X. J. Wang, and Z. L. Wang. 2020. “Exploring the Management of Industrial Hazardous
Waste Based on Recent Accidents.” Journal of Loss Prevention in the Process Industries 67(April):104224.
Zhu, Chengyuan, Sen Tang, Zili Li, and Xiuting Fang. 2020. “Dynamic Study of Critical Factors of Explosion
Accident in Laboratory Based on FTA.” Safety Science 130(September 2019):104877.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Journal of Academia
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
