PHYSICAL PROPERTIES OF BANANA PSEUDO-STEM WOVEN FABRIC TREATED WITH SOFTENING AGENT
Keywords:
banana stem fibre, softening agent, stiffness, woven fabricAbstract
Fibres from banana’s stem are abundantly available in Malaysia. This study focused on the production of woven fabric from banana pseudo-stem fibres. Yarn made of 100% banana stem and 100% cotton yarn were produced. Two types of retting techniques were conducted, which are water retting and retting using softening agent. The fibres were spun and weaved into plain weave fabric. All specimens were evaluated for yarn twist, yarn evenness, yarn linear density and selected fabric physical properties. The results obtained showed that banana stem fabric treated with softening agent has lower area density and higher thickness. Weft sample retted in softening agent has higher bending length and flexural rigidity than sample retted in water. This might be due to the decrement of yarn’s stiffness, which eases the insertion of yarn during shedding process. Weft sample retted in water has lower bending length due to coarser yarn and tends to break easily. It is found that retting banana stem fibres with softening agent affect the yarn linear density, area density, fabric stiffness properties and flexural rigidity of the fabric.
References
Baharin, A., Fattah, N. A., Bakar, A. A. and Ariff, Z. M. (2016). Production of laminated natural fibre board from banana tree wastes. Procedia Chemistry, 19, 999–1006. http://doi: 10.1016/j.proche.2016.03.149.
Bhatnagar, R., Gupta, G. and Yadav, S. (2015). A review on composition and properties of banana fibres. International Journal of Scientific & Engineering Research, 6 (5), 49–52.
Ebisike, K., AttahDaniel, B. E., Babatope, B. and Olusunle, S. O. O. (2013). Studies on the extraction of naturally-occuring banana fibers. The International Journal of Engineering and Science, 2 (9), 95–99.
Jandas, P. J., Mohanti, S. and Nayak, S. K. (2012). Renewable resource-based biocomposites of various surface treated banana fiber and poly lactic: characterization and biodegradability. Journal of Polymers and the Environment, 20, 583–595. https://doi.org/10.1007/s10924-012-0415-8
Maleque, M. A., Belal, F. Y. and Sapuan, S. M. (2007). Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. Arabian Journal of Science and Engineering, 32 (2B), 359–364.
Ramdhonee, A. and Jeetah, P. (2017). Production of wrapping paper from banana fibres. Journal of Environmental Chemical Engineering, 5, 4298–4306. https://doi.org/10.1016/j.jece.2017.08.011
Ruznan, W. S., Yusof, N. J. M., Yusoh, M. K. M., Kadir, M. I. A., Misnon, M. I., Ahmad, W. Y. W., Ahmad, M. R., Azmi, D. H. and Ahmad, N. A. (2012). The effect of household fabric softener on flame resistance of cellulose fabrics. IEEE symposium on Humanities, Science and Engineering Research, Kuala Lumpur, 759–761. doi: 10.1109/SHUSER.2012.6268991
Salleh, J., Mohd Yusoh, M. K. and Ruznan, W. S. (2015). Tensile strength of some natural-fibre composites. Pertanika Journal of Tropical Agricultural Science, 38 (4), 575-582.
Santosha, P. V. Ch. R. K., Sa, S. S. G. A. and Manikanth, V. (2018). Effect of fibre loading and thermal properties of banana and pineapple leaf fibre reinforced polyester composites. Materials Today: Proceeding, 5, 5631–5635. https://doi.org/10.1016/j.matpr.2017.12.155
Sapuan, S. M., Harun, N. and Abbas, K. A. (2007). Design and fabrication of a multipurpose table using a composite of epoxy and banana pseudostem fibres. Journal of Tropical Agriculture, 45 (1-2), 66–68.
Sharma, S. A. (2013). Unconventional textiles in India – banana fibres. Colourage, 60 (4), 33–36.
Subagyo, A., & Chafidz, A. (2018). Banana pseudo-stem fiber: Preparation, characteristics, and applications. Banana Nutrition-Function and Processing Kinetics. IntechOpen. http://dx.doi.org/10.5772/intechopen.82204.
Umachitra, C., Palaniswamy, N. K., Shanmugasundaram, O. L. and Sampath, P. S. (2017). Effect of mechanical properties on various surface treatment processes of banana/cotton woven fabric vinyl ester composite. Applied Mechanics and Materials, 867(5), 41-47. https://doi.org/10.4028/www.scientific.net/AMM.867.41
Venkateshwaran, N. and Elayaperumal, A. (2010). Banana fiber reinforced polymer composites – a review. Journal of Reinforced Plastics and Composites, 29(15), 2387–2396. https://doi.org/10.1177/0731684409360578
Vigneswaran, C., Pavithra, V., Gayathri, V., and Mythili, K. (2015). Banana fibre: scope and value-added product development. Journal of Textile and Apparel, Technology and Management, 9 (2), 83-87.
Xu, S., Xiong, C., Tan, W. and Zhang, Y. (2015). Microstructural, thermal and tensile characterisation of banana pseudo-stem fibers obtained with mechanical, chemical, and enzyme extraction. BioResources, 10 (2), 3724 – 3735.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Journal of Academia
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
