Factors Influencing Construction Workers' Adherence to Safety Regulations
DOI:
https://doi.org/10.24191/bej.v23i1.1574Keywords:
Construction Safety, Discrepancies, Ghana, Worker behaviour, Safety culture, Safety complianceAbstract
Construction workers face significant safety risks globally. Despite safety regulations, discrepancies persist between workers' knowledge and adherence to safe practices. This study investigates the factors influencing construction workers' adherence to safety regulations in Ghana. Specifically, it examines the discrepancies between workers' safety practices and established safety standards, identifying the causative factors leading to these discrepancies. A mixed-methods approach was employed. Quantitative data was collected by surveying 500 construction workers, focusing on demographics, safety knowledge, attitudes, and observed safety regulation discrepancies. Qualitative data was gathered through semi-structured interviews with a purposive sample of 30 construction workers and safety professionals to explore the reasons behind these discrepancies. Descriptive statistics and thematic analysis were used to analyse the data and were presented using tables. A significant disconnect was revealed between construction workers' safety knowledge and their adherence to safety regulations. The qualitative findings identified six (6) contributing themes: risk normalisation, inadequate training, peer pressure, personal protective equipment (PPE) discomfort, fear of retaliation, and lack of recognition of safe practices. Ghanaian construction firms should address the knowledge-practice gap and enhance safety by implementing competency-based training, effective communication, safety leadership, ergonomic PPE, an open communication culture, and safety recognition initiatives. The study advances understanding of safety culture within Ghana's construction sector by providing insights for creating targeted interventions to enhance safety compliance and foster a safer construction work environment.
References
Agyekum, K., Simons, B., & Botchway, S. Y. (2018) “Factors influencing the performance of safety programmes in the Ghanaian construction industry”, Acta Structilia, 25(2), pp. 39–68. Available at: https://www.ajol.info/index.php/actas/article/view/180639 (Accessed: 3 February 2025).
Almaskati, D., Kermanshachi, S., Pamidimukkala, A., Loganathan, K., & Yin, Z. (2024). A review on construction Safety: hazards, mitigation strategies, and impacted sectors. Buildings, 14(2), 526. https://doi.org/10.3390/buildings14020526.
Aidoo, I., Ansah, N. B., Bondinuba, F. K., & Allotey, E. S. (2024). Ghanaian construction workers’ health and safety knowledge and compliance. African Journal of Applied Research, 10(1), 161–177. https://doi.org/10.26437/ajar.v10i1.676
Bes, P., & Strzałkowski, P. (2024). Analysis of the effectiveness of safety training methods. Sustainability, 16(7), 2732. https://doi.org/10.3390/su16072732
Boadu, E. F., Sunindijo, R. Y., Wang, C. C., & Frimpong, S. (2021). Factors constraining the promotion of health and safety in public works procurement in developing countries. International Journal of Construction Management, 23(9), 1611–1621. https://doi.org/10.1080/15623599.2021.1990716
Boadu, E. F., Wang, C. C., & Sunindijo, R. Y. (2020). Characteristics of the construction industry in developing countries and its implications for health and safety: an exploratory study in Ghana. International Journal of Environmental Research and Public Health, 17(11), 4110. https://doi.org/10.3390/ijerph17114110
Boakye, M. K., Adanu, S. K., Adzivor, E. K., Coffie, G. H., & Ayimah, J. C. (2022). Factors influencing health and safety performance at construction sites in Ghana: the perspective of building artisans. International Journal of Occupational Safety and Ergonomics, 29(3), 1121–1127. https://doi.org/10.1080/10803548.2022.2112444
Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77–101. https://doi.org/10.1191/1478088706qp063oa
Brewer, E. W., Torrisi-Steele, G., & Wang, V. (2018). Addressing survey research. In Advances in Library and Information Science (ALIS) book series (pp. 341–359). https://doi.org/10.4018/978-1-5225-5164-5.ch020
Buniya, M. K., Othman, I., Sunindijo, R. Y., Kashwani, G., Durdyev, S., Ismail, S., Antwi-Afari, M. F., & Li, H. (2021). Critical Success Factors of Safety Program Implementation in Construction Projects in Iraq. International Journal of Environmental Research and Public Health, 18(16), 8469. https://doi.org/10.3390/ijerph18168469
Chapman, S. J. (2017). Review of Discovering Statistics using IBM SPSS Statistics, 4th Edition. Journal of Political Science Education, 14(1), 145–147. https://doi.org/10.1080/15512169.2017.1366328
Cheung, C. M., Zhang, R. P., Cui, Q., & Hsu, S. (2020). The antecedents of safety leadership: The job demands-resources model. Safety Science, 133, 104979. https://doi.org/10.1016/j.ssci.2020.104979
Chukwuemeka, E. I., & Uduma, O. M. (2022). Evaluating compliance of construction site safety rules as a complimentary tool to project completion within budget limit. Bima Journal of Science and Technology (2536-6041), 6(02), 1–6. https://doi.org/10.56892/bima.v6i02.355
Claxton, G., Hosie, P., & Sharma, P. (2022). Toward an effective occupational health and safety culture: A multiple stakeholder perspective. Journal of Safety Research, 82, 57–67. https://doi.org/10.1016/j.jsr.2022.04.006
Curcuruto, M., & Griffin, M. A. (2022). Upward safety communication in the workplace: How team leaders stimulate employees’ voice through empowering and monitoring supervision. Safety Science, 157, 105947. https://doi.org/10.1016/j.ssci.2022.105947
Choi, B., Ahn, S., & Lee, S. (2017). Role of Social Norms and Social Identifications in Safety Behavior of Construction Workers. I: Theoretical Model of Safety Behavior under Social Influence. Journal of Construction Engineering and Management, 143(5). https://doi.org/10.1061/(ASCE)co.1943-7862.0001271
Ding, L., Fang, W., Luo, H., Love, P. E., Zhong, B., & Ouyang, X. (2017). A deep hybrid learning model to detect unsafe behavior: Integrating convolution neural networks and long short-term memory. Automation in Construction, 86, 118–124. https://doi.org/10.1016/j.autcon.2017.11.002
Dowdle, T. S., Thompson, M., Alkul, M., Nguyen, J. M., & Sturgeon, A. L. E. (2021). COVID-19 and dermatological personal protective equipment considerations. Baylor University Medical Center Proceedings, 34(4), 469–472. https://doi.org/10.1080/08998280.2021.1899730.
Ernest, K., Samuel, A. S., Agyemang, D. Y., Daniel, O., & Caleb, D. (2020). Identification of factors influencing the pricing of sustainable construction materials in developing countries: views of Ghanaian quantity surveyors. International Journal of Construction Management, 22(11), 2144–2153. https://doi.org/10.1080/15623599.2020.1768462
Eyiah, A., Kheni, N., & Quartey, P. (2019) An Assessment of Occupational Health and Safety Regulations in Ghana: A Study of the Construction Industry. Journal of Building Construction and Planning Research, 7, 11-31. https://doi:10.4236/jbcpr.2019.72002.
Gao, X., Chen, G., Xiong, C., Li, X., Zhao, Y., & Chen, H. (2024). A mechanistic model for industrial workplace design based on inherent safety and health concepts. The Canadian Journal of Chemical Engineering, 102(9), 2998–3013. https://doi.org/10.1002/cjce.25279
Glowinski, S., & Majdanik, S. (2024). Fatal Consequences of Safety Non-Compliance in Non-Commercial Ultralight Aviation: a case study. Safety, 10(3), 77. https://doi.org/10.3390/safety10030077
Gómez-Bull, K. G., Ibarra-Mejía, G., & Vargas-Salgado, M. M. (2023). Risk perception in the construction industry: A literature review and future research directions. Work, 76(4), 1333–1344. https://doi.org/10.3233/wor-220379
Guest, G., & Fleming, P. (2015). Mixed methods research. In SAGE Publications, Inc. eBooks (pp. 581–614). https://doi.org/10.4135/9781483398839.n19
Haga, J., Huhtamäki, F., Sundvik, D., & Thor, T. (2024). Nothing to fear: strong corporate culture and workplace safety. Review of Quantitative Finance and Accounting, 63(2), 519–550. https://doi.org/10.1007/s11156-024-01264-6
Handoko, L., Martiana, T., & Partiwi, S. G. (2022). Occupational health and safety risk perception. International Journal of Health Sciences (IJHS) (En LíNea), 4852–4861. https://doi.org/10.53730/ijhs.v6ns3.6971
Henshaw, J. L., Gaffney, S. H., Madl, A. K., & Paustenbach, D. J. (2007). The Employer’s responsibility to maintain a safe and healthful work environment: An historical review of societal expectations and industrial practices. Employee Responsibilities and Rights Journal, 19(3), 173–192. https://doi.org/10.1007/s10672-007-9044-0
International Labour Organisation (ILO) (2017). General Survey on the Occupational Safety and Health Instruments Concerning the Promotional Framework, Construction, Mines and Agriculture. In: 106th Session International Labour Conference, International Labour Office, Geneva, Report III (Part 1B). https://libguides.ilo.org/conference/106-110
Kang, U., & Hwang, H.-J. (2022). The Importance of Anonymity and Confidentiality for Conducting Survey Research. Journal of Research and Publication Ethics, 4(1), 1–7. https://doi.org/10.15722/jrpe.4.1.202303.1
Karakhan, A., & Gambatese, J. (2018). Hazards and risk in construction and the impact of incentives and rewards on safety outcomes. Practice Periodical on Structural Design and Construction, 23(2). https://doi.org/10.1061/(asce)sc.1943-5576.0000359.
Keng, B. M., Gan, W. H., Tam, Y. C., & Oh, C. C. (2021). Personal protective equipment-related occupational dermatoses during COVID-19 among health care workers: A worldwide systematic review. JAAD International, 5, 85–95. https://doi.org/10.1016/j.jdin.2021.08.004.
Laryeafio, M. N., & Ogbewe, O. C. (2023). Ethical consideration dilemma: systematic review of ethics in qualitative data collection through interviews. Journal of Ethics in Entrepreneurship and Technology, 3(2), 94–110. https://doi.org/10.1108/jeet-09-2022-0014
Liang, H., Shi, X., Liu, K., & Cong, W. (2023). Construction worker response to unsafe coworker behavior: the mediating roles of safety silence and role stress and the moderating role of psychological contract of safety. Journal of Construction Engineering and Management, 149(3). https://doi.org/10.1061/jcemd4.coeng-12228
Li, J., Li, S., Jing, T., Bai, M., Zhang, Z., & Liang, H. (2022). Psychological safety and affective commitment among Chinese hospital staff: the mediating roles of job satisfaction and job burnout. Psychology Research and Behavior Management, Volume 15, 1573–1585. https://doi.org/10.2147/prbm.s365311
Lim, W. M. (2024). What is qualitative research? An overview and guidelines. Australasian Marketing Journal (AMJ). https://doi.org/10.1177/14413582241264619
Masuda, H., Kawakubo, S., Okitasari, M., & Morita, K. (2022). Exploring the role of local governments as intermediaries to facilitate partnerships for the Sustainable Development Goals. Sustainable Cities and Society, 82, 103883. https://doi.org/10.1016/j.scs.2022.103883
Meng, X., & Chan, A. H. (2020). Demographic influences on safety consciousness and safety citizenship behavior of construction workers. Safety Science, 129, 104835. https://doi.org/10.1016/j.ssci.2020.104835
Mustapha, Z., Akomah, B. B., Zebilila, M. D. H., Tieru, C. K., Oppon, J. A., & Aidoo, P. (2024). Occupational stress and its impact on health, safety, and performance among construction workers in Ghana’s central region. The Asian Review of Civil Engineering, 13(1), 22–29. https://doi.org/10.70112/tarce-2024.13.1.4231
Nandan Prasad, A. (2024). Regulatory Compliance and Risk Management. In: Introduction to Data Governance for Machine Learning Systems. Apress, Berkeley, CA. https://doi.org/10.1007/979-8-8688-1023-7_8
Nielsen, K., Ng, K., Vignoli, M., Lorente, L., & Peiró, J. M. (2022). A mixed methods study of the training transfer and outcomes of safety training for low-skilled workers in construction. Work and Stress, 37(2), 127–147. https://doi.org/10.1080/02678373.2022.2086646
Olmo-Extremera, M., Fernández-Terol, L., & Montes, D. A. (2023). Visual tools for supporting interviews in qualitative research: new approaches. Qualitative Research Journal, 24(3), 283–298. https://doi.org/10.1108/qrj-07-2023-0113
Quartey, S. H. (2017). Examining employees’ safety behaviours: an industry-level investigation from Ghana. Personnel Review, 46(8), 1915–1930. https://doi.org/10.1108/pr-06-2016-0146
Roscoe, J.T. (1975) Fundamental Research Statistics for the Behavioral Sciences, Volume 2, Editors' Series in Marketing. Holt, Rinehart and Winston, New York. Pp. 483, ISBN: 0030919347, 9780030919343
Raheem, A. A., & Hinze, J. W. (2014). Disparity between construction safety standards: A global analysis. Safety Science, 70, 276–287. https://doi.org/10.1016/j.ssci.2014.06.012
Rivera, F. M., Mora-Serrano, J., & Oñate, E. (2021). Factors influencing safety on Construction Projects (FSCPs): types and categories. International Journal of Environmental Research and Public Health, 18(20), 10884. https://doi.org/10.3390/ijerph182010884
Saad, N.M. (2016). The Influence of Safety Culture on Safety Performance in Saudi Arabian Construction Industry. Ph.D. Thesis, University of Salford, Salford, UK. Retrieved February 3, 2025, from https://salford-repository.worktribe.com/output/1400625/the-influence-of-safety-culture-on-safety-performance-in-saudi-arabian-construction-industry
Sabbir R., M., & Hussain, B. (2014), "The impact of trust, motivation and rewards on knowledge sharing attitudes among the secondary and higher secondary level students’: Evidence from Bangladesh", Library Review, Vol. 63 No. 8/9, pp. 637-652. https://doi.org/10.1108/LR-06-2013-0072
Sehsah, R., El-Gilany, A. H., & Ibrahim, A. M. (2020). Personal protective equipment (PPE) use and its relation to accidents among construction workers. La Medicina del lavoro, 111(4), 285–295. https://doi.org/10.23749/mdl.v111i4.9398
Shafa, N. B., & Susilawati, N. S. (2024). Implementation of occupational safety and health implementation at PT. Medan Smart Jaya. Journal of Educational Innovation and Public Health, 2(3), 39–44. https://doi.org/10.55606/innovation.v2i3.2938
Shirali, G. A., Zarei, E., & Yazdi, M. (2024). Safety causation models in complex sociotechnical systems. In Studies in systems, decision and control (pp. 47–72). https://doi.org/10.1007/978-3-031-62470-4_3
Smallwood, J. (2015). Optimising the Elements of a Construction Health and Safety (H&S) Programme and Audit System. Procedia Engineering, 123, 528–537. https://doi.org/10.1016/j.proeng.2015.10.105
Sunindijo R.Y., & Zou P.X.W. (2013) 'Conceptualizing safety management in construction projects', Journal of Construction Engineering and Management, 139, pp. 1144 –1153. http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0000711
Toole, T. M., Gambatese, J. A., & Abowitz, D. (2016). “Owners’ Role in Facilitating Prevention through Design.” J. of Professional Issues in Engineering Education and Practice. https://www.researchgate.net/publication/304192229_Owners%27_Role_in_Facilitating_Prevention_through_Design
Tymvios, N., & Gambatese, J. A. (2015). Perceptions about Design for Construction Worker Safety: Viewpoints from Contractors, Designers, and University Facility Owners. Journal of Construction Engineering and Management, 142(2). https://doi.org/10.1061/(asce)co.1943-7862.0001067
Wang, X., Qiao, Y., Wang, D., Sheng, Z., & Newaz, M. T. (2021). Psychological contract of safety and construction worker behavior: felt Safety Responsibility and Safety-Specific Trust as mediators. Journal of Construction Engineering and Management, 147(11). https://doi.org/10.1061/(asce)co.1943-7862.0002185
Xu, J., Cheung, C., Manu, P., Ejohwomu, O., & Too, J. (2022). Implementing safety leading indicators in construction: Toward a proactive approach to safety management. Safety Science, 157, 105929. https://doi.org/10.1016/j.ssci.2022.105929
Yen, C., Hsu, S., Ye, K., Shang, K., & Wu, C. (2022). A safety compliance model for container terminal operations: the roles of the safety climate, non-compliance cost and safety self-efficacy. Maritime Policy & Management, 51(1), 118–132. https://doi.org/10.1080/03088839.2022.2089754
Zakari M., Tieru, C. K., Akomah, B. B., & Yankah, J. E. (2024). Limitations for the implementation of artificial intelligence in construction health and safety in Ghana. Baltic Journal of Real Estate Economics and Construction Management, 12(1), 103–118. https://doi.org/10.2478/bjreecm-2024-0007
Zhang, S., Hua, X., Huang, G., & Shi, X. (2022). How Does Leadership in Safety Management Affect Employees’ Safety Performance? A Case Study from Mining Enterprises in China. International Journal of Environmental Research and Public Health, 19(10), 6187. https://doi.org/10.3390/ijerph19106187
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Chris Kurbom Tieru, Mustapha Zakari, Benjamin Boahene Akomah, Thomas Abilgah
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
CC BY-NC-ND 4.0 DEED
Attribution-NonCommercial-NoDerivs 4.0 International
