Study of the Structural Property and Biodegradation Relationship of Regenerated Cellulose Nanofibre/Glycerol Laminated Films Incorporating Recycled PLA Waste
DOI:
https://doi.org/10.24191/srj.v23i1.41616Keywords:
Additive manufacturing waste, bioplastic, flexibility, lamination, plasticityAbstract
The increasing generation of plastic waste from packaging and additive manufacturing, particularly polylactic acid (PLA), necessitates sustainable recycling strategies. This study reports the fabrication of regenerated cellulose nanofibre (RCNF) composite films incorporating recycled PLA waste from 3D printing and glycerol as a plasticiser for sustainable packaging applications. Cellulose nanofibres were dissolved using a sodium hydroxide-urea (NaOH/urea) solvent system and regenerated via a freeze–thaw process, followed by chloroform-dissolved PLA waste phase and lamination with a glycerol-containing coagulants at varying concentrations. The structural properties of the fabricated RCNF/glycerol/PLA films were thoroughly analysed. The Fourier Transform Infrared Spectroscopy (FTIR) analysis demonstrated the existence of intermolecular interactions among cellulose, glycerol, and PLA. Concurrently, the higher glycerol content has enhanced the flexibility and water uptake of the film produced, reaching over 300% at 20% glycerol loading. However, the incorporation of PLA into the film composite has reduced water absorption due to the polymer cellulose chain entanglement. Meanwhile, the soil burial tests revealed that higher glycerol concentrations slowed biodegradation by reduction of the weight loss. In contrast, the increase in the incubation temperatures has intensified the weight loss where 50 °C incubation demonstrated higher weight loss percentage. However, these films showed increased thermal decomposition, suggesting enhanced processability under heat. The findings highlight the potential of upcycled CNF/PLA/glycerol films as an environmentally friendly alternative for packaging applications, contributing to circular material use and reduced ecological impact.
References
[1] I. Ibrahim, A. F. Osman & T. L. Ping, 2019. Effects of Ultrasonication Process on Crystallinity and Tear Strength of Thermoplastic Starch/cellulose Biocomposites, IOP Conference Series: Materials Science and Engineering, 701, 012045.
[2] S. H. Omar, M. A. Abd. Aziz, S. A. Saad, K. Md Isa, N. A. F. Bashari & M. A. Hairunnaja, 2025. Breaking Boundaries in Biodegradable Packaging: A Comprehensive Review on Magnetic Alignment of Iron-Cellulose in PLA, Journal of Engineering Research and Education, 17, 1 –20.
[3] A.K. Tivedi, M. K. Gupta & H. Singh, 2023. PLA based biocomposites for sustainable products: A review, Advanced Industrial and Engineering Polymer Research, 6, 382e395.
[4] R. Kumar, A. Verma, A. Shome, R. Sinha, S. Sinha, P.K. Jha, R. Kumar, P. S. Kumar, S. Das, P. Sharma & P.V.V. Prasad, 2021. Impacts of Plastic Pollution on Ecosystem Services, Sustainable Development Goals, and Need to Focus on Circular Economy and Policy Interventions, Sustainability, 13, 9963.
[5] N. Singh & T. R. Walker. 2024. Plastic Recycling: A Panacea or Environmental Pollution Problem, Materials Sustainability, 2(17), 1 – 7.
[6] F. Haq, M. Kiran, I.A. Khan, S. Mehmod, T. Aziz & M. Haroon. 2025. Exploring the pathways to sustainability: A comprehensive review of biodegradable plastics in the circular economy. Materials Today Sustainability, 29, 101067.
[7] D. Mohan, Z. K. Teong, A. N. Bakir, M.S. Sajab & H. Kaco, 2020. Extending Cellulose-Based Polymers Application in Additive Manufacturing Technology: A Review of Recent Approaches, Polymers, 12, 1876 – 1907.
[8] W. N. L. W. Jusoh, M.S. Sajab, P. M. Abdul & H. Kaco, 2022. Recent Advances in 3D Bioprinting: A Review of Cellulose-Based Biomaterials Ink, Polymers, 14, 2260 – 2285.
[9] H. Kaco, S. Zakaria, C. H. Chia & L. Zhang, 2014. Transparent and Printable Regenerated Kenaf Cellulose/PVA Film, Bioresources, 9(2), 2167 – 2178.
[10] K. M. Salleh, S. Zakaria, M. S. Sajab, S. Gan & H. Kaco, 2019. Superabsorbent Hydrogel from Oil Palm Empty Fruit Bunch Cellulose and Sodium Carboxymethylcellulose, International Journal of Biological Macromolecules, 131, 50 – 59.
[11] H., Jin, C. Zha & L. Gu. 2007. Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution. Carbohydrate Research, 342(6), 851 – 858.
[12] P. Cazon, M. V´azquez & G. Velazquez, 2018. Cellulose-glycerol-polyvinyl Alcohol Composite Films for Food Packaging: Evaluation of Water Adsorption, Mechanical Properties, Light-Barrier Properties and Transparency, Carbohydrate Polymers, 195, 432 – 443.
[13] M. S. Sajab, C. H. Chia, C. H. Chan, S. Zakaria, H. Kaco, S.W. Chook, S. X. Chin & A. M. Noor. 2016. Bifunctional Graphene Oxide–Cellulose Nanofibril Aerogel Loaded With Fe(III) For The Removal of Cationic Dye via Simultaneous Adsorption and Fenton Oxidation, RSC Advances, 6, 19819.
[14] M. Fan, D. Dai & B. Huang, 2012. Fourier Transform Infrared Spectroscopy for Natural Fibres. Dr Salih Salih (Ed.) (2012) ISBN: 978-953-51-0594-7, InTech.
[15] N. Z. M. Zairullisham, U. H. Ab Hakim, H. Kaco, A. S. Saadon & M. S. Sajab. 2022. Reprocessing of 3D Printing Filament’s Fragment by Hydrolysis and Recycling into the Formation of Bioplastic. Materials Today Proceeding, 51, 1277 – 1281.
[16] R. Aly, O. Olalere, A. Ryder, M. Alyammahi & W. A. Samad, 2024. Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing, Polymers, 16, 3569.
[17] M.R. Hasan, I. J. Davies, A. Pramanik, M. John & W. K. Biswas. 2025. Recycling Post-Consumed Polylactic Acid Waste Through Three-Dimensional Printing: Technical vs. Resource Efficiency Benefits, Sustainability, 17, 2484.
[18] B. Anwajler, E. Zdybel & E. Tomaszewska-Ciosk, 2023. Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing) - A Literature Review, Polymers, 15, 3534.
[19] V. C. Agbakoba, N. Webb, E. Jegede, R. Phillips, P. S. Hlangothi & M. J. John, 2024. Mechanical Recycling of Waste PLA Generated From 3D Printing Activities: Filament Production and Thermomechanical Analysis, Macromolecular Materials and Engineering, 309, 2300276.
[20] Y. C. Chien, J. H. Wu, C. H. Shu, J. T. Lo & T. C. Yang, 2024. Closed-Loop Recycling of 3D-Printed Wood–PLA Composite Parts: Effects on Mechanical and Structural Properties via Fused Filament Fabrication, Polymers, 16, 3002.
[21] D. Hidalgo-Carvajal, H. Muñoz, J. J. Garrido-González, R. Carrasco-Gallego & V. Alcázar Montero, 2023. Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion, Polymers, 15, 3651.
[22] M. Hassan, A. K. Mohanty & M. Misra, 2024. 3D printing in upcycling plastic and biomass waste to sustainable polymer blends and composites: A review, Materials & Design, 237, 112558.
[23] P. Cazón, G. Velazquez & M. Vázquez, 2018. Novel Composite Films from Regenerated Cellulose-glycerol-Polyvinyl Alcohol: Mechanical and Barrier Properties, Food Hydrocolloids, 89, 481 – 491.
[24] R. Moreira, R. C. Rebelo, J. F. J. Coelho & A. C. Serra, 2024. Novel thermally regenerated flexible cellulose-based films. European Journal of Wood and Wood Products, 82, 1813 – 1826.
[25] M. Karamanlioglu & G. D. Robson, 2013. The Influence of Biotic and Biotic Factors on the Rate of Degradation of Poly(lactic) Acid (PLA) Coupons Buried in Compost and Soil, Polymer Degradation and Stability, 98, 2063 – 2071.
[26] S. Spoljaric, A. Salminen, N. D. Luong, & J. Seppälä. 2015. Ductile nanocellulose-based films with high stretchability and tear resistance. European Polymer Journal, 69, 328 – 340.
[27] M. Sánche z-Gutiérrez, I. Bascón-Villegas, E. Espinosa, E. Carrasco, F. Pérez-Rodríguez & A. Rodríguez, 2021. Cellulose Nanofibers from Olive Tree Pruning as Food Packaging Additive of a Biodegradable Film, Foods, 10, 1584.
[28] M. Rouhi, S. H. Razavi & S. M. Mousavi, 2017. Optimization of Crosslinked poly (vinyl alcohol) Nanocomposite Films for Mechanical Properties, Materials Science and Engineering: C, 71, 1052 – 1063.
[29] Q. Wang, C. Ji, J. Sun, Q. Zhu & L. Liu. 2020. Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils, Molecules, 25(14), 3306.
[30] S. Cheng, X. Liu, J. Zhen & Z. Lei, 2019. Preparation of Superabsorbent Resin with Fast Water Absorption Rate Based on Hydroxymethyl Cellulose Sodium and Its Application, Carbohydrate Polymers, 225, 115214.
[31] S. W. Lusiana, D. Putri, D. & I. Z. Nurazizah, 2019. Bioplastic Properties of Sago-PVA Starch with Glycerol and Sorbitol Plasticizers, Journal of Physics: Conference Series, 1351, 012102.
[32] M. N. Hamdan, A. M. Mohd Naim, N. S. Mohd Rozi, M. S. Sajab & H. Kaco, 2024 Intensify Biodegradation Process of Polylactic Acid (PLA) Waste Generated from 3D Printing Activities, Materials Science Forum, 1114, 137 – 144.
[33] D. Mohan, Z. K. Teong, M. S. Sajab, N. H. N. Kamarudin & H. Kaco, 2021. Intact Fibrillated 3D-printed Cellulose Macrofibrils/CaCO3 for Controlled Drug Delivery, Polymers, 13, 1912.
[34] Á. Agüero, E. Corral Perianes, S. S. Abarca de las Muelas, D. Lascano, M. D. M. de la Fuente García-Soto, M. A. Peltzer, R. Balart & M. P. Arrieta, 2023. Plasticized Mechanical Recycled PLA Films Reinforced with Microbial Cellulose Particles Obtained from Kombucha Fermented in Yerba Mate Waste, Polymers, 15, 285.
[35] E. Vengadesan, S. Morakul, S., Muralidharan, P. K. Pullela, A. Alarifi & T. Arunkumar, 2025. Enhancement of polylactic acid (PLA) with hybrid biomass-derived rice husk and biocarbon fillers: a comprehensive experimental study, Discover Applied Sciences, 7, 161.
[36] S. S. Rumi, S. Liyanage & N. Abidi. 2024. Soil burial-induced degradation of cellulose films in a moisture-controlled environment, Scientific Reports, 14, 6921.
[37] C. S. Marques, R. R. A. Silva, T. R. Arruda, T.V. de Oliveira, A. R. F. Moraes, S. O. Ferreira, N. R. de Melo, M. V. Dias, M. C. D. Vanetti & N. F. F. Soares, 2024. Degradation in Soil of Active Cellulose Acetate and Zein Blend Films Incorporated with Different Plasticizers and Garlic Essential Oil, Food Packaging and Shelf Life, 42, 2024, 101254.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Hatika Kaco, Noorul Jannah Aizul Hussin, Syahidatul Nadhilah Shah Lail, Mohd Shaiful Sajab, Nuradlyna Safyah Mohd Rozi, Muhammad Naqib Hamdan, Amir Mustaqim Mohd Naim, Muizzuddin Muhammad Nazri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
